Kit # 2 Includes the Following:
325 Velcro Backing Plate for Drill
301G Wool Cutting Pad
(1-Pad)
330G Foam Polishing Pad
(1-Pad)
X1130 Wool/Foam Cleaning Brush
S1500 Sand Paper (4 Sheets)
E7200 Sand Paper Backing Pad
M8512 Diamond Cut 12 oz.
G12310 PlastX Polish 10 oz.
Kit includes step by step instructions.


  

#2 Heavy Duty Kit
Instructions
|
1) Pre-wash or clean
headlight area of vehicle.
2) Apply any type of masking tape to area around headlight.
3) Pre soak sand paper in a bucket of soap water for 10-15 minutes.
4) Take any type of empty spray container and fill with soap water.
5) Wrap sand paper around black rubber sanding pad. Spray soap water on
headlight and sand area with sand paper keeping sand paper lubricated while
sanding.
6) Dry headlight.
7) Attach backing plate to electric or cordless drill.
8) Attach wool-buffing pad to backing plate.
9) Use #85 with wool pad and buff out sanding marks using small brush in
between application to clean pads.
10) Repeat same procedure with yellow foam pad and Plastx.
11) Wipe down headlight area and remove tape.
* To clean pads with brush. Run drill at low RPM and apply brush to
surface of pads while wheel is running. Do this procedure when pads start to
load up during buffing.
|
Plastic Restoration Kit # 2 Heavy Duty
Restore the clarity of your
headlights or taillights. Designed to repair heavily damaged plastic lenses
that have turned cloudy, yellow, heavily hazed, heavily oxidized
or have started to peel and flake. Backing plate and pads
attach to any standard electric or battery operated hand drill. Requires no professional detailing experience.
Kit comes with enough product to do approximately 2-4 heavily damaged lenses
depending on size and severity.
$48.00
Internet Special
$37.95

|
|
Before
 |
|
After
 |
|
|